You tell us which Modbus devices will be connected. We load the right templates, set up your cloud environment and check the configuration. All you do is connect it.
The templates are already on the gateway when it reaches you. No looking up register addresses, function codes or data types.
Connect it, power it, enter the serial number in the portal. If you can wire a cabinet, you can get this running.
If your device is not in the library of 915 templates yet, we build it for free as soon as we have the register data.
The configuration work happens at our end, before the gateway ships. What is left for you is mounting and wiring.
When you order, you enter which Modbus devices you will connect. Brand and model is enough. Not sure yet? Send it over later.
We load the right templates onto the gateway, set up your environment in the portal and verify the registers. If a template is missing, we build it free of charge.
RS485 or network cable on, power on, serial number in the portal. Your readings go live. No configuration step left.
Plug and play does not mean there is nothing left to do. Here is exactly where the line sits.
You do not have to hand it over. Everything we do, you can do yourself, before and after delivery.
The whole library is free to browse and import, with or without a gateway and without an account.
Address, function code, data type, byte order, scale. All of it can be filled in by hand if you prefer.
Build a configuration you use often and store it as your own template, then reuse it on every gateway.
Add or remove registers, change templates, adjust thresholds. Pre-programmed is not a sealed configuration.
New meter or heat pump on site? Connect it yourself via the QR code, or send us the model and we will do it.
Configurations move in and out as JSON, so you can version them or share them across your team.
Pre-programming is included with every gateway
Missing templates are built free of charge
Self-configuration is always available
Heat pumps, energy meters, inverters, EV chargers, climate systems and industrial equipment from hundreds of brands. Free to browse, whether you are a customer or not.
Search the libraryThen we build the template free of charge. All we need is the register data, usually found in the manufacturer manual. The template then joins the public library, so the next installer can use it too.
Request a templateCan't find your question?Frequently asked questions
Open the portal with real demo data. No account needed. No strings attached.
